How to program a rca remote using code search

The LED light indicates the device is ready to program. Device should turn on. If it starts, try changing the channel to verify that remote is programmed correctly. There are a couple hundred codes that you may need to go through.

If you go through the whole list without finding a matching code, the light on the remote will blink four times and then shut off. There's a good chance that the remote will not work with your device, since you've tried every code available.

Press Enter on the remote when the device turns off. This locks the code into your remote. If you accidentally moved past the correct code, you'll have to start the search again.

If the code was successful, you should be able to turn the device on and off using the remote. Make sure you've pressed the correct device button at the top of the remote before testing the features. Not all functions may be available on the universal remote. Your remote may have limited functionality compared to the device's original remote. Retrieve the code. After you've locked in the code, write it down so that you can enter it easily in the future.

Press and release the device button for the locked code you want to retrieve. Press and release the Code Search button. Press the number keys in order, starting with 0. When the light comes on, this indicates the first digit. Start over at 0 and repeat until you have all three digits.

TVs, even from the same brand, use different codes. You will have to find your model number and search online to find the codes. Not Helpful 23 Helpful Use the code search function explained in this article or look in the owner's manual for the DVD player. Not Helpful 9 Helpful Make sure you are using the correct device code. If you're unable to locate the code, try doing a code search with your RCA remote.

Not Helpful 7 Helpful See whether the battery needs to be replaced. Some of the buttons don't work because you need to replace the battery. If it's still not working after that, it would probably be best to just buy a new remote. Not Helpful 16 Helpful If you see a button that says Input, use that to select your TV.

Not Helpful 6 Helpful 7. What do I do if my remote doesn't have a code search button and only works to turn off the TV? There's also a chance that other functions of the remote will not work with that particular device. Not Helpful 13 Helpful Turn on the device you want to control, then select it using the corresponding device button on the remote. Press Menu on your remote, then use the volume up and down buttons or the arrow buttons, if your remote has them to move through the menu options.

Not Helpful 6 Helpful 2. You can use a universal remote control to reassign the menu button. Use this article to guide you through locating the correct code for your TV. Measure content performance.

Develop and improve products. List of Partners vendors. By Cameron Thomas Eittreim. Tweet Share Email. What to Know Easiest: Use the auto-programming method to automatically search for compatibility. You will repeat the same process for programming the RCA Universal Remote to your Blu-ray player and other compatible devices.

Was this page helpful? Thanks for letting us know! Email Address Sign up There was an error. Please try again. You're in! Thanks for signing up. There was an error. Tell us why! More from Lifewire. How to Program a Universal Remote Control. Connecting the remote to your device is an easy process. But first, you need to ensure that your remote has the right batteries. Also, make sure that there are no bad wire connections anywhere and the devices are powered on.

Now, follow these instructions to set up your remote successfully:. You just need to enter the device codes to connect the devices together. Here are all the steps that you need to take:.